The Walter Danville Corp. Horizontal Slicer, Model HS-150 is capable of slicing product in increments of 1/10" or one millimeter in a range of up to 1". Custom manual adjustment is made via a hand crank on one side for maximum variation in product thickness. The Single or Dual Lane Horizontal Slicers are capable  of speeds from 0 to 150 fpm. This means that they will deliver fast, accurate cuts while yielding a high quality marketable product. Our High Speed Horizontal Slicer is USDA approved for use in the food processing industry. The separate adjustment for each lane on the dual lane model allows two different thickness settings to be run simultaneously. The Horizontal Slicer features fully automated adjustments on the press belt and on the blade height. Digital readout of blade position makes adjustment easy. The Horizontal Slicer also offers full length hold down belts for product, controls in a transparent Nema 4-x enclosure for safe and easy wash down and a main panel with a stainless Nema 4-x with lock-out capability mounted on the machine.

Expected Production That You Deserve:
(based upon your ability to load)

Dual Lane, Dual Blade at Approximately 85 fpm 16,000pcs per hr.

Single Lane, Single Blade at Approximately 85 fpm 4,800pcs per hr.

With our HS-150 High Speed Slicer you will DRAMATICALLY INCREASE your yield.

 Truly Increasing your company’s Profit Margin

Electropolished Slicers Available.
Capable of Slicing Fresh, Cooked, or Tempered Meat